Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Beverly Hills
Gate repair in Beverly Hills isn’t a parts-swap job. Most of the gates we work on here are one-of-a-kind iron estate gates, many hung fifty to ninety years ago, running on commercial-grade operators tied into Crestron or Savant automation. When one of those fails, you need someone who can identify the problem in your driveway, not someone who wants to haul the gate off and sell you a replacement. We’re Gatewood Fence & Gate, and Hal Gatewood has been fixing gates since 2001. Call (951) 749-5734 and a live person answers, any hour.
Why Gatewood Fence & Gate Is Beverly Hills’s Preferred Gate Repair Company
Hal answers his own phone. That’s not a marketing line; it’s how the shop runs. When you call about a sagging wrought-iron swing gate off Sunset or a slide gate that binds up in the canyons north of Beverly Hills, the person you talk to is the person who decides how the job gets done. We show up, diagnose in the driveway, and fix what’s actually broken.
Local knowledge matters more in Beverly Hills than almost anywhere else in the LA basin. The gates here are heavier, older, and more custom than what you’ll find over the hill in West Hollywood or down in Culver City. A national outfit that quotes by the square foot doesn’t know that a 1930s Spanish Colonial gate off Coldwater Canyon often has an original hinge post footing that’s shifted in the dry soil. We do, because we’ve rebuilt them. Our reviews from Beverly Hills customers consistently mention the same things: we answer the phone, we show up in the window we gave, and we don’t pad the invoice after the fact. Every job carries the 90-Day Done Right Promise, in writing. If it’s not done right, one call brings Hal back. The name is on the shop, and the shop is down the road.
Our Gate Repair Services in Beverly Hills
Electric Gate Repair
Electric gate repair in Beverly Hills usually means one of two things: a failed control board or a safety sensor that’s tripped and won’t reset. The boards we replace here are often decades old, and the heat that collects against stucco walls and the power surges that roll through during Santa Ana season finish them off. If your gate is stuck mid-cycle and your Crestron or Savant panel shows an error, we trace the fault to the board, the motor, or the sensor and replace only what’s gone bad. We stock common repair parts for Linear and DoorKing operators on the truck, and we can source legacy boards for vintage FAAC and BFT units faster than most shops because we’ve been doing it for over two decades.
Automatic Gate Repair
An automatic gate that won’t open is a security problem and a practical one. In Beverly Hills, where driveways are often long and the gate is the only way to the street, a dead operator means you’re walking. We service automatic gate repair across the flat streets south of Sunset and the hillside lots above it. The failure patterns differ by zone. South of Sunset, we see worn gearboxes and tired motors on swing operators that have been cycling for thirty years. North of Sunset, we see slide gate operators straining against tracks packed with grit blown in from Benedict and Coldwater Canyons. We diagnose both on site and quote the repair before any work starts.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle. That’s where we start. On Beverly Hills estate gates from the 1920s through the 1960s, the original posts were sometimes set in footings that are now cracked, tilted, or dried out. The gate settles, the latch stops lining up, and the operator fights the extra weight until something burns out. We repair the post, not the panel. Hal welds on site, so the gate stays in your driveway and keeps its original ironwork. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Gates in Beverly Hills get knocked out of alignment by two things: shifting soil and Santa Ana winds. A heavy wrought-iron swing gate that’s been racked by grit-laden canyon gusts will start dragging, scraping, or failing to close against the stop. We bring it back to plumb, level, and true, then adjust the operator limits so it closes cleanly without slamming. If the realignment reveals a worn hinge or a failing post, we’ll tell you and quote it separately. You’ll know the price before we do the work, and the price won’t change at the door.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beverly Hills
We service Viking and Ghost Controls operators regularly on Beverly Hills properties, along with Linear and DoorKing units that are common on estate gates throughout the flats and the hills. We carry common repair parts for these brands on the truck, which means most repairs happen same-day. For legacy FAAC, BFT, and Elite operators still running on older Beverly Hills estates, we source parts through channels we’ve built over two decades. If your operator predates modern safety standards, we’ll quote a retrofit path that adds proper entrapment protection without replacing the gate you love.
Common Gate Repair Problems We See in Beverly Hills Homes
- Obsolete control boards from the pre-UL 325 era. Many Beverly Hills estate gates were automated before modern safety standards existed. The boards fail from heat and surges, leaving the gate unresponsive to Crestron or Savant commands, and the fix usually requires a retrofit, not a direct swap.
- Worn hinge post footings on original iron gates. The dry soil south of Sunset shifts over decades. A 1940s Tudor gate off Santa Monica Boulevard might look fine from the street while its post footing crumbles below grade. The gate sags, the latch misses, and the operator burns out.
- Cantilevered slide gates binding on hillside lots. Properties north of Sunset, especially in Trousdale Estates, often use slide gates engineered for steep approaches. Grit from canyon winds packs the track, accelerates rack and pinion wear, and the operator trips its safety sensor mid-cycle.
- Rust and weld fatigue on decorative ironwork. Beverly Hills’s low humidity slows surface rust, but it also dries out nylon rollers and plastic components faster than coastal neighborhoods. We see hairline cracks at original welds and freeze-ups at hinge pins that have lost their lubrication.
Pricing for Gate Repair in Beverly Hills, CA
Here’s what gate repair in Beverly Hills actually costs. A hinge and post repair on a wrought-iron swing gate typically runs $450 to $1,200, depending on how much of the footing needs to be rebuilt. Gate realignment is usually $250 to $500. Electric gate repair ranges from $350 for a sensor replacement up to $1,800 for a full control board retrofit on a legacy operator tied into whole-home automation. Automatic gate operator replacement with a new safety-compliant unit starts around $1,600 for standard residential models and goes up from there on commercial-grade Beverly Hills estate systems. We never change a price after we quote it. The number we give you is the number on the invoice. Call (951) 749-5734 for a free estimate and we’ll come out, diagnose the problem, and put the price in writing before any work begins.
We Also Serve Cities Near Beverly Hills
We handle Gate Repair for homeowners throughout the westside and the Valley. If you’re in West Hollywood, Studio City, Sherman Oaks, or Santa Monica, our crews work your neighborhood too. And if you’re in Beverly Hills proper, from the flats to Trousdale, we’re the local shop that knows your gate by the way it swings.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Beverly Hills
Yes, in most cases we can add current UL 325-compliant photo-eyes and safety edges to a 1950s gate without replacing the gate itself. We retrofit the safety system onto the existing operator and gate frame, which typically costs $400 to $900 in Beverly Hills depending on gate length and operator type. Your vintage gate stays; the safety hardware gets updated. Call (951) 749-5734 and we’ll assess what your specific gate needs.
Santa Ana winds funnel grit and fine debris through Benedict and Coldwater Canyons and deposit it directly into your slide gate track and rack. The grit packs into the track, accelerates wear on the rack and pinion, and eventually the operator’s torque sensor reads the drag as an obstruction and reverses or stops the gate. We clean the track, address the wear, and can install brush seals or a raised track profile to slow the buildup. Expect $300 to $700 for a typical binding repair on a Beverly Hills hillside gate.
Yes. We excavate around the footing, reset or rebuild the post, and weld or re-anchor the hinge assembly in place. The gate stays on its hinges through most of the process. Depending on how much of the original footing has deteriorated, a Beverly Hills post repair runs $600 to $1,400. We did exactly this on a 1930s Spanish Colonial off Sunset last year, where the original footing had shifted in the dry soil, and the gate has been swinging true since.
It depends on the scope. Beverly Hills Building & Safety operates independently of LA City and is stricter about gate automation than neighboring municipalities. Replacing a failed control board on an existing permitted operator usually doesn’t need a new permit. But adding solar-powered operators, new access control wiring, or intercom systems often triggers a standalone permit and inspection in Beverly Hills, even when the same work would go uninspected in West Hollywood. We’ll tell you before we start whether your job needs a permit and what the timeline looks like.
Yes, and that’s the bulk of our work in Beverly Hills. Hal welds on site, so the gate never leaves your property. We match the existing iron profile and joinery, repair cracks at original welds, and preserve the patina and design. When a hinge or decorative element is beyond repair, we fabricate a replacement that matches the original. A typical ornamental iron repair runs $400 to $1,200 depending on how much of the original iron is salvageable. Call (951) 749-5734 for a free estimate and we’ll do a hands-on assessment of your gate.
Contact Us for Gate Repair in Beverly Hills
If your gate is sagging, stuck, or ignoring commands from your Crestron or Savant system, call (951) 749-5734. A live person answers 24 hours a day. We’ll talk through what’s happening, schedule a time to come out to Beverly Hills, and give you a written price before any work starts. The 90-Day Done Right Promise applies to every job, in writing. If it’s not done right, Hal comes back and makes it right. That’s been the way since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills gate repair with free estimates and straight answers.