Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Beverly Hills
Gate access control in Beverly Hills means wiring, programming, and maintaining the systems that let you open your gate without getting out of the car, and decide exactly who gets in. That covers keypads, remotes, phone entry, card readers, video intercoms, and smart access tied into whole-home automation. On the flat streets south of Sunset and the hillside drives above it, we regularly work on bespoke ornamental iron gates that weigh hundreds of pounds and run on commercial-grade operators. Call Gatewood Fence & Gate at (951) 749-5734 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Beverly Hills’s Preferred Gate Access Control Company
Hal Gatewood has been fixing gates since 2001, and the name is on the shop. That accountability matters in a city where half the gates we’re called to inspect were installed by a contractor who is no longer answering the phone. Our Gate Access Control work in Beverly Hills leans repair-first: we replace the failing component, weld on site, and keep the gate in your driveway instead of hauling it off. A sagging 1940s wrought-iron gate in Beverly Hills Flats gets the same forensic attention as a modern cantilevered slide gate in Trousdale Estates. We coordinate scheduling from our Los Angeles office, with crews serving Beverly Hills locally. The 90-Day Done Right Promise is in writing on every job: if it’s not right, one call brings Hal back.
We’ve worked on gates along Sunset Boulevard, in the flats, in Trousdale, up Benedict Canyon, in Beverly Hills Post Office. That range means we’ve seen what Santa Ana grit does to slide-gate rollers and what 60-year-old hinge posts do under a heavy ornamental gate. Beverly Hills customers call because they’ve been burned by an out-of-town outfit that quoted one price and charged another at the door. Hal quotes upfront, in writing, before any work starts.
Our Gate Access Control Services in Beverly Hills
Keypad Entry
A keypad is the most common access control request we get in Beverly Hills. Homeowners want the gardener to have a code, the housekeeper another, and the ability to delete a code the day a vendor relationship ends. On older estate gates, we often match a new keypad to an existing Linear or DoorKing operator rather than replacing the whole system. Typical keypad replacement or new installation in Beverly Hills runs $250 to $600, depending on whether we’re cutting into a stone column or mounting on a metal gate frame. We sync it to the existing operator and show you how to change codes yourself.
Remote Control
Remotes remain the most straightforward access method, and we service every major brand that Beverly Hills gates rely on: Linear, Viking, DoorKing, Ghost Controls, FAAC, BFT, LiftMaster, Elite, Mighty Mule. When a remote stops working, the problem is usually not the remote; it’s the receiver board or the operator logic. We diagnose before we sell. Reprogramming a remote to an existing operator is a $75 to $150 service call. A new compatible remote runs $45 to $95. If you have a Crestron or Savant integration for your gate, we make sure the remote programming doesn’t conflict with the automation system’s own commands.
Phone Entry
Phone entry systems let you buzz in guests or deliveries by calling your cell. In a city like Beverly Hills, where gates are often set far back from the street and stone pillars block line of sight, phone entry spares you the walk. We install and service cellular-based phone entry units that don’t require a landline. A basic phone entry module starts around $300; integration with an existing video intercom typically falls in the $350 to $700 range for hardware plus labor. We handle the wiring, which matters more in Beverly Hills than elsewhere, because Beverly Hills Building & Safety is strict about low-voltage and access-control wiring inspections.
Card Reader
Card readers are common on Beverly Hills properties with staff or multiple vendors. We install proximity card readers that tie into the same operator controlling the gate. A card reader system on a single gate, including encoder and cards, ranges from $400 to $900. We can program individual cards with access windows, so the pool service card only works on Tuesdays, for example. This is one of the more technically involved access control installations, and it’s where the independent Beverly Hills permitting process comes into play; we handle the paperwork.
Video Intercom and Smart Access
On this page we want to be direct: video intercom and smart access are where Beverly Hills separates from neighboring cities. The housing stock here includes 1920s to 1960s Spanish Colonial and Tudor Revival estates with original ornamental iron gates, plus Trousdale moderns with heavy cantilevered slide gates. Many of these gates operate on commercial-grade operators and were never designed for modern IP video intercoms. We retrofit carefully: a video intercom for a Beverly Hills gate typically runs $800 to $1,800, with smart access keypads and app integration in the $500 to $1,200 range on top of that. We work with Crestron, Savant, Control4, and the major gate operator brands too. The goal is one app for your gate, your lights, and your HVAC, not three apps fighting each other.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beverly Hills
We’re certified to service nine major gate brands, including Linear, Viking, Ghost Controls, and DoorKing, and we see all four on Beverly Hills gates. Because Beverly Hills’s gate stock includes custom, often one-of-a-kind ornamental iron pieces built to match the architecture, we also work with specialty fabrication shops when a component is not a catalog item. It’s rare that we have to tell a Beverly Hills customer “you need a new gate.” On-site welding and careful part matching mean the existing gate usually stays. We don’t stock parts for one-off 1930s gate hardware because no one does, but we know the shops that can reproduce them.
Common Gate Access Control Problems We See in Beverly Hills Homes
- Santa Ana grit in slide-gate rollers and rack-and-pinion mechanisms: The winds that funnel through Benedict and Coldwater Canyons carry fine dust that gets into roller bearings and pinion teeth. We regularly see Trousdale slide gates that jerk or stall because the grit has bound the mechanism. Our fix is usually cleaning, re-lubing with a dry film lubricant, and replacing any rollers that have flattened or cracked.
- Dry air cracking nylon rollers and photocell housings: Beverly Hills lacks the coastal moisture that keeps plastic pliable. The Santa Ana events dry everything out further. Cracked photocell housings trigger false entrapment stops, and cracked nylon wheels make a slide gate sound like a garbage disposal. These are small parts, but when they fail, the whole access system stops working.
- Sagged hinge posts on 1920s-1950s ornamental iron swing gates: On the flat streets south of Sunset, heavy wrought-iron gates from the estate build era develop sag at the hinge post, not in the gate itself. The gate drops, the operator struggles, and the entrapment-protection system faults out. We repair the post first; a new operator on an old post will fail again in a season.
- Permit-related wiring surprises: Beverly Hills Building & Safety operates independently of LA City, and access-control wiring that would go uninspected in West Hollywood often requires a standalone permit here. We’ve corrected work by out-of-town contractors who assumed LA City rules applied and left homeowners with unpermitted wiring. We pull the permit, do the inspection, and close it out properly.
Pricing for Gate Access Control in Beverly Hills, CA
Access control work in Beverly Hills runs higher than the county average because the gates are heavier, the automation is more sophisticated, and the permitting is stricter. A basic remote reprogram is $75 to $150. A new keypad installation is $250 to $600. Phone entry runs $300 to $700. Card reader systems range from $400 to $900. Video intercoms run $800 to $1,800, and smart access integration with Crestron or Savant adds $500 to $1,200 depending on scope. Every price is quoted and agreed in writing before any work starts. That is not negotiable; it’s how we work. Call (951) 749-5734 for a free estimate, and remember: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Beverly Hills
Our Beverly Hills work often takes us into West Hollywood, Studio City, Sherman Oaks, and Santa Monica. The gate stock and permitting differ across each, but the service standard doesn’t. If you live in one of these areas, see our page for Gate Access Control in Beverly Hills and call us at (951) 749-5734; we’ll tell you straight if we’re the right shop for your gate.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Beverly Hills
Often, yes. Because Beverly Hills Building & Safety operates independently from LA City, low-voltage access control wiring, solar operators, and intercom installations that go unpermitted in West Hollywood or Culver City frequently trigger a standalone permit in Beverly Hills. We pull the permit, schedule the inspection, and close it out; if an out-of-town contractor did unpermitted work, we can bring it into compliance. Call (951) 749-5734 and we’ll tell you what your specific gate needs before you spend a dime.
Because the wind is pushing against a gate that weighs hundreds of pounds, and the force concentrates at the hinge post. If the post footing shifted or the post was undermounted decades ago, every Santa Ana event racks the gate further out of alignment; the operator then faults on entrapment protection. We re-set the post, not just the gate. Call (951) 749-5734 for an assessment before the next wind event does more damage.
Yes. We regularly sync video intercoms and smart access keypads with Crestron, Savant, and Control4 systems in Beverly Hills, so the gate opens from the same app that controls lights and HVAC. The integration work adds $500 to $1,200 over the intercom hardware. We’ll tell you the exact number after we see your existing operator and automation panel. Call (951) 749-5734 for a free estimate.
Usually not the track itself. On Trousdale’s steep, curved approaches, the grinding typically comes from flattened or cracked nylon rollers, or from grit that has packed into the rack-and-pinion teeth. The dry air and Santa Ana events chew up those rollers faster than in coastal neighborhoods. We replace the rollers and re-grease the rack with a dry film lubricant, and the gate runs quiet again. Call (951) 749-5734 and Hal will take the call himself.
Yes. Every automatic gate opener in Beverly Hills must have functioning entrapment protection: photocells, contact edges, or both, and the system must reverse if it meets resistance. On older 1920s to 1950s ornamental gates, the original operators often lack modern entrapment protection; we upgrade them to UL 325 compliance. That’s a safety issue, not a suggestion. Call (951) 749-5734 to have yours checked.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills and surrounding communities since 2001.