Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across West Hollywood
Gate repair in West Hollywood usually runs $185 to $640 depending on whether we’re fixing a sagging hinge post, a burned-out opener, or converting an outswing gate to a slide configuration. Most repairs on this side of town happen in older apartment buildings or tight alley-loaded lots, and we handle those jobs the same day the call comes in. If your gate is scraping the concrete or your opener is dead, call (951) 749-5734 and a live person answers. Not a queue. Not a bot. Hal Gatewood’s company has been doing this since 2001, and we know West Hollywood’s alleys, easements, and design review process better than any out-of-area outfit that shows up with a catalog and a sales pitch.
Why Gatewood Fence & Gate Is West Hollywood’s Preferred Gate Repair Company
We’re not a franchise, and we don’t run a call center three states away. Hal Gatewood’s name is on the shop and on every invoice. When you call about a gate in West Hollywood, the person who answers knows the difference between an alley-loaded lot off Romaine Street and a hillside driveway off Doheny. That local knowledge matters because West Hollywood’s gates fail in ways people in Beverly Hills or Sherman Oaks never see.
Our crew has repaired and rebuilt gates across West Hollywood for over two decades. We’ve worked in the rent-stabilized apartment corridors near Santa Monica Boulevard, the Norma Triangle, and the hillside-adjacent pockets along the eastern edge. The reviews West Hollywood customers leave mention the same things: we show up in the window we promised, we fix what’s broken instead of upselling a replacement, and the 90-Day Done Right Promise is written on the invoice, not buried in fine print. If something isn’t right within 90 days, one call brings Hal back. No runaround.
We answer the phone 24/7. You won’t get a voicemail at 2 a.m. when your gate is stuck open and the building is exposed. You’ll get a person who schedules the visit and shows the price before work starts. Estimates are free. The price you get quoted is the price you pay. That’s not a sales tactic. That’s how Hal has run the business since 2001.
Our Gate Repair Services in West Hollywood
Electric Gate Repair
West Hollywood’s stock of electric gate openers tilts toward LiftMaster on newer installations and older Linear or Viking units on pre-2005 conversions. Santa Ana winds that funnel through the Laurel Canyon corridor hit hillside-adjacent blocks in the Norma Triangle hard, and we regularly replace overloaded swing arms and stripped gears on tall ornamental gates that catch wind like a sail. We service LiftMaster, Viking, and Linear systems on-site, and we carry common boards, arms, and photo eye kits on the truck so we aren’t making you wait for a part to ship from Texas.
Automatic Gate Repair
If your automatic gate in West Hollywood stops mid-cycle or reverses for no reason, it’s usually a failing limit switch, a misaligned safety sensor, or a hinge that’s binding enough to trip the overload. We run through those components in order, replace what’s actually failed, and don’t sell you a new motor because the old one was dusty. Hal has been repairing automatic gates since 2001, and he’d rather weld a bracket back into true than charge you for a $900 operator that won’t fix the underlying swing geometry.
Hinge & Post Repair
West Hollywood’s pre-1970 apartment buildings are full of original ornamental wrought-iron gates whose hinge posts have been rusting at the base for 60 years. Dry-basin rust eats the lower 6 inches of the post, the gate sags, and the tenant drags it across the concrete until the hinges tear out. We cut out the corroded section or replace the post entirely, weld fresh mounting plates on-site, and set the gate back to the correct reveal. We do not patch a hinge and call it done. A gate sags in the hinge post, not in the middle and that is where we start.
Gate Realignment
Tight alley clearances off streets like Norton and Laurel mean a half-inch of sag turns a working gate into a scraping, binding nuisance. We realign gates on-site by resetting hinges, shimming or rebuilding posts, and adjusting the operator’s travel limits so the gate opens fully without slamming into the alley easement line. On many West Hollywood lots, realignment is a two-hour job that saves you from a full replacement you didn’t need.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in West Hollywood
We’re certified to service nine major gate brands, and for West Hollywood jobs we most commonly work on LiftMaster, Linear, Viking, and Ghost Controls equipment. If your building has an older DoorKing swing operator or a Viking board from the mid-2000s, we likely have the replacement part on the truck or at the shop by end of day. We keep common West Hollywood parts stocked locally because we know your parking garage gate can’t be down for a week while someone orders a motherboard from a distributor in Ohio. For automatic gate repair in West Hollywood, we show up with the right parts the first time.
Common Gate Repair Problems We See in West Hollywood Homes
- Hinge posts corroding on original 1930s to 1960s iron gates. Dry-basin rust concentrates at the base where water pools against the footing. The post looks fine from eye level but has lost its section below grade. Replacing the hinge and calling it fixed lasts six months. We rebuild the footing.
- Operator arms failing during Santa Ana wind events. Tall ornamental gates on hillside-adjacent properties in the Norma Triangle and along the Hollywood Hills West border act like wind sails. Openers rated for 400 pounds get asked to move 600 pounds of wind-loaded iron. We spec heavier-duty operators and adjust force limits so the motor doesn’t cook itself.
- Outswing gates that violate alley easement rules. This is the one we see most often from other contractors. West Hollywood’s rear alleys are easement lines, not extensions of your lot. An outswing gate that crosses the easement gets flagged during design review. We convert to slide gates or inswing-only configurations.
- Slide gate binding on tight lots. Lots on the 50-foot grid mean slide gates ride within an inch of the fence line. A warped rail or a trash-bin ding throws everything off. We straighten rails, replace rollers, and adjust rack-and-pinion mesh so the gate travels smooth without grinding.
Pricing for Gate Repair in West Hollywood, CA
Here are the ranges you can expect in West Hollywood, quoted before we do the work:
- Hinge and post repair: $185 to $420, depending on whether we need to cut out and rebuild the post footing or just reset the hinges.
- Gate realignment: $145 to $290 for most alley-loaded swing or slide gates.
- Electric opener repair: $220 to $540. A control board swap runs lower; a full operator replacement runs higher.
- Slide gate conversion: $1,200 to $3,800 depending on gate weight, rail length, and whether we’re adding a LiftMaster operator.
- Weld and rust repair: $165 to $480. We weld on-site, so the gate never leaves your property.
Every price is stated and agreed before we touch a tool. No trip charge inside the county. $40 off any repair over $200. Seniors and veterans get 10% off, permanently. Call (951) 749-5734 for a free estimate.
We also serve Gate Repair customers across the greater Los Angeles area with the same on-site welding and repair-first approach.
We Also Serve Cities Near West Hollywood
If you’re just over the line, we handle gate repair in Beverly Hills, Studio City, North Hollywood, and Sherman Oaks too. Same live answer on the phone, same 90-Day Done Right Promise, same owner-operated approach. Call (951) 749-5734 and we’ll get it scheduled.
Serving West Hollywood, CA - Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in West Hollywood
West Hollywood’s rear alleys are easements, not private driveway extensions. An outswing gate that swings across the alley easement line violates the city’s design standards and gets rejected during review. The fix is a slide gate or an inswing configuration. We converted a 1950s wrought-iron pedestrian gate on a Norma Triangle alley to a LiftMaster slide gate with rack and pinion for exactly this reason. Call (951) 749-5734 and we’ll tell you what your lot will actually allow.
Yes, usually. The sag is almost always in the hinge post, not the gate itself. We cut out the corroded base, rebuild the footing, set the post plumb, and re-hang the gate. The original iron work stays. We’ve done this on dozens of pre-1970 buildings between Santa Monica Boulevard and the Norma Triangle. Call (951) 749-5734 for a free estimate on your building’s gate.
Almost always, because slide gates travel parallel to the property line instead of swinging into it. West Hollywood’s 50-foot lots are tight, but a cantilever or wheeled slide gate with a rack-and-pinion operator fits in clearances as narrow as 14 inches beside the drive. We spec the track and operator for your specific alley width. Call (951) 749-5734 and we’ll measure it on-site.
Santa Ana events that blow through the Laurel Canyon and Coldwater Canyon corridors push sustained wind against tall ornamental gates, overloading the opener’s motor and stripping gears on swing arms. Hillside-adjacent pockets like the Norma Triangle see this most. We upsize the operator and adjust the force and travel limits so the gate stops fighting the wind. Call (951) 749-5734 before the next wind event cooks your opener.
Yes. California follows UL 325, which requires automatic gates to have monitored entrapment protection: photo eyes at minimum, and reverse-edge sensors on gates that travel toward a fixed object. If your West Hollywood gate’s safety sensor is bypassed or dead, it needs repair before the gate re-opens. We test and replace photo eyes and edges on every automatic gate job. Call (951) 749-5734 to schedule a safety check.
How West Hollywood’s Alleys Change the Way We Repair Gates
Most of West Hollywood’s residential lots load parking from the rear, off narrow alleys that run between streets like Norton, Laurel, and West Knoll. Those alleys are easements, not your property, and a gate that swings outward over the easement line is a code issue waiting for a design review rejection. That constraint doesn’t exist in Beverly Hills or Hollywood, and out-of-area contractors consistently miss it. We see it on first visits all the time: someone spec’d an outswing gate on an alley-loaded lot in West Hollywood, and the only fix is a slide gate conversion or an inswing retrofit. It changes what we stock, what we recommend, and how we bid the job. Our Gate Repair crew has dealt with this enough that we spec slide gates on alley lots as a default, not an afterthought.
We replaced a rusted-out hinge post and installed a LiftMaster slide gate operator on an original 1950s wrought-iron pedestrian gate off a narrow alley in the Norma Triangle. The old swing gate had been illegally outswinging over the easement for years, so we converted it to a slide gate with rack and pinion, added a safety photocell, and kept the alley clear while we worked. The tenant came out and said the gate hadn’t traveled that smoothly since before she moved in. That job took one afternoon, and the gate still runs true months later.
There’s also the rent-stabilized housing factor. West Hollywood has an extraordinarily dense concentration of rent-stabilized apartment buildings, most built between the 1930s and 1960s. Landlords under the city’s rent stabilization ordinance face real cost pressure, which means many of them patch gate hardware year after year instead of replacing it. We respect that. We repair what’s repairable, weld what’s cracked, and rebuild posts instead of selling a new gate. A landlord who’s been patching a 1950s pedestrian gate for a decade usually just needs the hinge post rebuilt and the latch re-seated. That’s a $300 fix, not a $4,000 replacement. Hal’s been doing this since 2001 and he gets genuinely annoyed when he finds a gate that someone replaced wholesale because a hinge was worn.
On the other end, the celebrity-heavy pockets like the Norma Triangle and the hillside homes near the West Hollywood/Hollywood Hills West border want high-security automated driveway gates that satisfy the city’s design review process. Those jobs need a different approach: architectural compatibility, permits pulled correctly, entrapment protection dialed in, and tight clearance work on steep driveways with limited swing space. We do both tiers, and we don’t treat a $300 hinge fix and a $12,000 automated driveway gate any differently on the paperwork. The name on the shop is the same either way.
Serving All of West Hollywood
We run calls all over West Hollywood: the Norma Triangle, the apartment corridors along Santa Monica Boulevard, the hillside blocks east of Doheny, the West Hollywood West neighborhood near Beverly Hills, and the side streets off Melrose where alley-loaded lots are the rule. If your building is on Romaine, Norton, Laurel, West Knoll, or Havenhurst, we’ve worked on a gate down your block. Call (951) 749-5734 and we’ll come take a look. Estimates are free, the quote is fixed before work starts, and a live person answers when you call.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, locally owned and owner-operated since 2001.