Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Beverly Hills
If your gate in Beverly Hills is sagging, grinding, or dead in the driveway, you need a welder who understands what these gates actually are: one-of-a-kind, often irreplaceable, and usually tied to a house that cost more than most commercial buildings. Gatewood Fence & Gate handles gate parts and welding for Beverly Hills estates, from hinge replacements on 1930s Spanish Colonial swing gates to custom welding on contemporary cantilevered slides in Trousdale. Hal Gatewood has been at this since 2001, and the work gets done on site, in your driveway, not hauled off to some shop you’ll never see. If the gate won’t move, call (951) 749-5734 and a live person answers.
Why Gatewood Fence & Gate Is Beverly Hills’s Preferred Gate Parts & Welding Company
Hal gatewood’s name is on the shop, and the shop is local enough that you can drive to it and look him in the eye. That matters in Beverly Hills, where too many homeowners have had an out-of-town contractor quote one number on the phone and show up with another. We publish our address and license number. Every person who shows up is background-checked and uniformed.
Our reviews from Beverly Hills customers talk about the same things: we showed up in the window we promised, we welded on site instead of swapping parts that didn’t need swapping, and we wrote the 90-Day Done Right Promise on the invoice. Not buried in fine print. If the repair isn’t done right, one call brings Hal back. No runaround.
We also answer the phone 24/7. Not a voicemail, not a dispatch queue three states away. A live person. When your gate is stuck open at 11 p.m. on a hillside off Benedict Canyon, that’s the difference between sleeping and not sleeping.
Our Gate Parts & Welding Services in Beverly Hills
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. Beverly Hills estate gates are often hung on heavy welded barrel hinges or custom strap hinges that were forged 70 or 80 years ago. When those wear, the gate drops, drags on the driveway, and starts shearing latch bolts. We replace worn hinge pins, rebuild hinge barrels, and re-weld loose hinge plates back to the post or the gate frame. On most Beverly Hills jobs the hinge replacement runs $250 to $650 depending on gate weight and whether we’re working on a single swing or a double leaf.
Post Replacement
Fix the panel without the post and you’ll fix it twice. Beverly Hills has a real soil problem for gate posts: much of the flat portion south of Sunset sits on old alluvial soil that shifts with winter rains, and the hillside lots north of Sunset deal with decomposed granite that drains fast but erodes around post footings. A leaning post is the beginning of a gate that won’t latch. We dig out the old post, set a new steel post in concrete with proper depth below grade, and weld the hinge plates back on. Expect $550 to $1,400 for a typical Beverly Hills estate gate post replacement, more for tall custom posts with ornamental caps.
Rail Repair
Wrought-iron gates depend on top and bottom rails to carry their weight. When a rail cracks at the weld point, the whole gate loses its frame integrity. We see this constantly on 1920s and 1930s Spanish Colonial gates in the flats, where decades of temperature cycling has fatigued the original forge welds. We cut out the cracked section, weld in new solid bar stock to match, and grind it smooth so the repair disappears into the original pattern. Most rail repairs on Beverly Hills ornamental gates run $180 to $520 per rail section.
Custom Welding
This is where we spend a lot of our time in Beverly Hills. No two of these gates are identical. When a hinge, a scroll, a latch, or a frame section fails, there’s no catalog part to order. We weld new steel, match it to the existing design, and fabricate whatever the gate needs so it stays true to the original. We can also weld reinforcement plates, gussets, and new latch mounts onto modern gates, and handle stainless steel work for pool areas on estates south of Sunset. Custom welding runs $95 to $210 per hour plus materials, and we quote the whole job before any work starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beverly Hills
We service and retrofit operators from DoorKing, Linear, Viking, and Ghost Controls, along with FAAC, BFT, LiftMaster, Elite, and Mighty Mule. Beverly Hills gates lean heavily on commercial-grade equipment, and the operator on your gate may be older than the car in your garage. We keep common boards, limits, and photocells in stock for fast turnaround, and when a part is no longer manufactured, we know which retrofit kits work without tearing out your existing post and gate structure.
Common Gate Parts & Welding Problems We See in Beverly Hills Homes
- Santa Ana-driven grit destroys rollers and tracks. The canyons north of Sunset, especially Benedict and Coldwater, funnel those dry winds hard. Grit packs into the track, chews up nylon rollers, and racks heavy swing gates off their hinge alignment. We see gates that worked fine in May failing by October because the rollers turned to powder.
- Aging gates without modern safety photocells create liability. Many Beverly Hills estate gates were hung decades before UL 325 entrapment standards existed. If your gate reverses by contact instead of by photocell beam, it’s an injury waiting to happen. We retrofit current safety edges and photocells onto older operators, often without replacing the whole unit.
- Obsolete control boards in legacy operators. DoorKing and Elite made boards for decades, and many of them are simply gone. When the board dies, you can’t order a new one. We can often retrofit a current board to an older operator and keep the original motor and gearbox running.
- Low humidity dries out plastic parts faster than you’d think. Beverly Hills doesn’t rust steel like Santa Monica, but the dry air bakes nylon rollers, plastic limit cams, and operator gears. They get brittle, crack, and fail. We’ll catch these during a standard service call before the gate tears itself up.
Pricing for Gate Parts & Welding in Beverly Hills, CA
We Also Serve Cities Near Beverly Hills
We work in Beverly Hills, West Hollywood, Studio City, Sherman Oaks, and Santa Monica. If you’re in any of those neighborhoods and your gate needs welding, call us. Same local crew, same 90-Day Done Right Promise. Learn more about our Gate Parts & Welding services, or see what we do specifically in Beverly Hills.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Beverly Hills
My Beverly Hills gate was built in the 1950s and the control board is dead. Can you source a replacement, or do I need a whole new operator?
If the operator is a DoorKing, Elite, or Linear from that era, there’s a good chance the original board is no longer manufactured. We can often retrofit a current-generation board to the older motor and gearbox, which saves you $1,200 to $3,000 compared to a full operator replacement. Sometimes the old gearbox is too worn to justify a new board, and we’ll tell you that straight and write up the replacement quote. Call (951) 749-5734 and we’ll identify your operator by make and model before we even come out.
The gate sags and drags on the driveway. Should I weld a brace onto the panel?
No, not as a first move. The sag is almost always in the hinge post, not the panel. Welding a brace onto the gate without fixing the post shift transfers the load to a different spot and you’ll crack the rail there instead. We rebuild the hinge post or replace the hinge pins first, then decide if the panel actually needs reinforcement. On most Beverly Hills swing gates, hinge work fixes 90% of the sag. Call (951) 749-5734 and we’ll tell you what your gate actually needs.
Do I need a permit to replace the gate operator or add a solar panel to my Beverly Hills gate?
In Beverly Hills, yes, probably. Beverly Hills Building & Safety operates independently of LA City and is notably strict about gate automation permits. A solar-powered operator or access-control intercom wiring that would go uninspected in West Hollywood or Culver City often triggers a standalone permit and inspection here. We’ve helped enough Beverly Hills homeowners navigate that process to know exactly what gets flagged and what doesn’t. We’ll handle the permit paperwork and the inspection scheduling so you don’t have to stand in line at City Hall on Rexford Drive.
My gate opener runs but the gate stops halfway. Is it the motor or the track?
Usually it’s neither in Beverly Hills. It’s the rollers. The Santa Ana winds that barrel through Benedict and Coldwater Canyons pack fine grit into the track, and the rollers bind. The operator pulls current, the thermal sensor kicks in, and the gate stops mid-travel like it’s asking for a break. We replace the nylon rollers, clean the track, and realign the rack if needed. If it’s still stopping after that, then we look at the motor capacitor. Call (951) 749-5734 and we’ll walk you through a quick check before we come out.
Can you weld a new latch onto my ornamental iron swing gate without ruining the original design?
Yes, and this is exactly the kind of work we do most in Beverly Hills. We cut the broken latch at its base, weld a new one onto the original mounting plate, and finish it to match the surrounding patina. On gates where the original latch was a forged scroll or custom piece, we’ll repair the original latch rather than replace it, because nothing from a catalog is going to match a 1920s Spanish Colonial gate. Call (951) 749-5734 and we’ll tell you what we can save.
Contact Gatewood Fence & Gate
If your Beverly Hills gate needs welding or replacement parts, call (951) 749-5734 for a free estimate. A live person answers, day or night. We’ll tell you what the job costs before we start, and we’ll write the 90-Day Done Right Promise on the invoice.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills since 2001.