Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across West Hollywood
Gate parts and welding in West Hollywood usually means one of two things: a 1950s apartment gate that’s finally given up, or a modern hillside driveway gate that the Santa Ana winds keep beating on. Either way, the fix almost always lives in the hinge post, the rail, or the weld, not in a shiny new gate from a catalog. We’re Gatewood Fence & Gate. We’ve been welding and rebuilding gates since 2001, and we handle Gate Installation - West Hollywood projects all over the area, from the Norma Triangle down to the eastern flats. If your gate sags, jams, or sheared a hinge, call (951) 749-5734 and a live person answers. Usually that person is Hal.
Why Gatewood Fence & Gate Is West Hollywood’s Preferred Gate Parts & Welding Company
West Hollywood isn’t like neighboring Beverly Hills or Studio City. The housing stock skews old, much of it rent-stabilized apartment buildings from the 1930s through the 1960s, and those buildings have ornamental iron gates that have been patched, welded, and re-welded for decades. We know those gates. We know the hinge post that rotted at the base, the gate that drags on the alley asphalt, and the opener that predates modern safety sensors. This is our bread and butter.
Hal Gatewood is the owner. His name is on the shop, his license number is published, and when you call about a gate in West Hollywood, you’re talking to the person who’ll stand behind the work. Every job we do carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings us back. That’s not a slogan. That’s the way Hal has run things for over two decades, and it’s why West Hollywood property managers keep our number in their phones.
We also answer the phone 24/7. Not a voicemail, not a call center. A live person. When a gate on a rent-stabilized building fails and a tenant can’t get their car out of the alley garage, you can’t wait until Monday morning.
Our Gate Parts & Welding Services in West Hollywood
When a gate fails, the answer is rarely “replace the whole thing.” Most of the time it’s a hinge, a post, a rail, or a weld. Here’s what we do most often in West Hollywood. And remember, our Gate Parts & Welding team does the work on site, in your driveway or alley, not in some shop across town.
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. On West Hollywood’s older ornamental iron gates, hinge barrels wear oval, pins snap, and the gate drops a quarter inch every year until it drags. We cut out the old hinge, weld in a new one rated for the panel weight, and shim the gate back to level. On the pre-1970 apartment gates around the Norma Triangle and the West Hollywood West neighborhood, we often find the original hinge was never greaseable. We swap in sealed-bearing or zerk-fitted hinges so the next forty years go easier.
Post Replacement
The post is the gate’s foundation. In West Hollywood’s alleys, a hinge post set in 1955 has spent seventy years absorbing gate swings, car bumpers, and Santa Ana wind loads. When the post finally shears at the base or leans six degrees into the easement, welding the panel alone won’t fix it. Fix the panel without the post and you’ll fix it twice. We cut the old post at grade, break out the footing, set a new steel post in concrete, and sleeve or reinforce as needed. Then the gate hangs true again.
Rail Repair
Slide gates on West Hollywood’s alley-loaded lots take abuse. The bottom rail grinds over cracked alley asphalt, the top rail catches wind, and the gear rack gets knocked out of alignment. We straighten bent rails, repair or replace rack sections, and re-anchor the guide rollers. On hillside-adjacent properties along the northern edge of West Hollywood, where Santa Ana wind gusts funnel down Coldwater Canyon, we add rail stiffeners so the gate doesn’t whip mid-travel.
Custom Welding
Sometimes the part doesn’t exist anymore. A 1930s wrought-iron pedestrian gate with a broken scroll or a snapped picket needs a welder, not a parts catalog. We weld on site, fabricate replacement sections to match the original profile, and grind the repair smooth so it disappears into the old ironwork. For West Hollywood landlords under rent-stabilization cost pressure, this matters. A skilled weld on the original gate costs a fraction of a custom replacement and preserves the ironwork the building has had for nearly a century.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in West Hollywood
We’re certified to service nine major West Hollywood Gate Motor & Opener brands, and in West Hollywood we see a lot of Linear, Viking, and DoorKing units on apartment and condo gates, plus Ghost Controls on the newer hillside homes. West Hollywood’s older buildings frequently run openers that were installed long before UL 325 entrapment protection became code. We can retrofit safety photocells and edge sensors onto many of those existing operators, including older Linear and Viking boards, rather than telling you to replace a good motor. We stock common parts locally so a West Hollywood call doesn’t mean a gate sitting open for a week while someone ships a part from Texas.
Common Gate Parts & Welding Problems We See in West Hollywood Homes
These are the failure patterns that come up again and again in West Hollywood, and they’re rarely the ones a generic gate company expects.
- Sheared hinge posts on 1940s-1960s ornamental iron gates. The post rusts at the base, hidden inside a stucco column or underground, and shears off entirely when a tenant swings the gate hard against the stop. The gate panel ends up resting against the alley wall. We replace the post and the hinge, not just weld the panel back on.
- Missing safety retrofits on rent-stabilized building gates. Older operators lack entrapment protection, and a gate reversing onto a car or a person is a liability no landlord wants. We add photocells and edge sensors to existing operators. The retrofit is far cheaper than a lawsuit.
- Santa Ana wind damage on slide gates. When gusts barrel through Laurel Canyon and Coldwater Canyon into West Hollywood’s hillside-adjacent streets, slide-gate rails bend and gear racks knock out of alignment. The gate jams mid-travel, usually at night, usually when someone needs to park. We straighten and stiffen.
- Alley clearance miscalculations. West Hollywood’s rear easements are often ten feet wide or less. Outswing gates are structurally impossible, and we see gates that were spec’d and hung wrong by companies that don’t know the alleys. Inswing or slide-gate retrofits are the fix.
Pricing for Gate Parts & Welding in West Hollywood, CA
Gate welding and parts pricing in West Hollywood runs in clear ranges. A welded hinge repair on a pedestrian gate typically costs $180 to $320. A bottom rail straightening and rack re-alignment on a slide gate runs $250 to $450. Post replacement, including concrete work and a new steel post, runs $450 to $950 depending on footing depth and post size. A custom weld to restore broken ironwork, like a snapped scroll or picket, runs $150 to $400 per section. Sag correction with a brace, hinge rebuild, and post reinforcement runs $300 to $600. Every price is quoted and agreed before we touch the gate. Call (951) 749-5734 for a written quote. And remember: $40 off any repair over $200, seniors and veterans save 10% on every job, and there’s no trip charge anywhere in the county.
We Also Serve Cities Near West Hollywood
Our Gate Parts & Welding in West Hollywood service area reaches the neighborhoods right around you. We work in Beverly Hills, Studio City, North Hollywood, and Sherman Oaks, plus the hillside streets along the West Hollywood and Hollywood Hills West border. If you’re in one of those cities with a failing gate, call (951) 749-5734 and we’ll schedule a visit.
Serving West Hollywood, CA - Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in West Hollywood
No, not permanently. A gate sags because the hinge post has moved, rusted, or failed, not because the panel bent. Welding the panel or adding a turnbuckle cable without fixing the post is a band-aid. On West Hollywood’s 1940s-1960s iron gates, we almost always replace or re-set the post, then rebuild the hinge. Fix the panel without the post and you’ll fix it twice. Call (951) 749-5734 and we’ll tell you honestly whether your post is salvageable.
Yes, in most cases. We retrofit Gate Access Control in West Hollywood systems with safety photocells and edge sensors onto existing Linear, Viking, and DoorKing operators all over the city. The operator’s control board usually has input terminals for accessory safety devices, and we wire the new sensors through those. If the board is too old to accept them, we can install an external safety monitor. We’ll quote it before any work starts. Call (951) 749-5734 for a free estimate.
Because the alleys are too narrow. Most residential gates in West Hollywood open onto rear easements that are ten feet wide or less. An outswing gate would swing into the alley and block traffic, which is why the city’s design review process for gates on alley-loaded lots essentially requires inswing or slide-gate configurations. Out-of-area companies spec outswing gates on first visits all the time. We don’t. We measure the actual easement first.
We can almost always weld the hinge. The original iron on a 1930s West Hollywood gate is usually forge-welded and structurally sound, even if the hinge barrel is worn through. We cut out the broken hinge, fabricate a replacement that matches the original proportions, and weld it in place. The gate itself, with its original ironwork, stays right where it’s been for nearly a century. We’ll quote the weld before we start. Call (951) 749-5734.
The best fix is a rail stiffener, not a thicker rail. We weld or bolt a structural channel along the back of the existing rail to increase its section modulus, which is the engineering term for how much bending it can take. Then we re-align the gear rack and check the guide rollers. On hillside-adjacent West Hollywood properties where the wind funnels through the canyon corridors, this is the difference between a gate that jams every October and one that runs through the whole season. Call (951) 749-5734 and we’ll take a look at your rail.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving West Hollywood since our first alley gate weld over two decades ago.