Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Studio City, CA
When your driveway gate stops opening in Studio City, it rarely happens at a convenient time. It happens at 7 a.m. when you’re already late for a call in Burbank, or at midnight after a long edit bay session when the safety sensors are blinking and the panel won’t move. That’s when you need someone who actually answers the phone. At Gatewood Fence & Gate, a live person picks up 24 hours a day, and we handle gate repairs throughout Studio City including the hillside drives above Ventura Boulevard, the flats around Fryman Canyon, and the older ranch-style neighborhoods near Moorpark Park. Call (951) 749-5734 and you’ll talk to a person, not a recording.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Studio City Homeowners Choose Gatewood Fence & Gate
Hal Gatewood has run this company since 2001, and his approach hasn’t changed: fix what’s actually broken, weld it on site when you can, and put the guarantee in writing. Studio City has a particular concentration of automated gates with intercoms, cameras, and access control systems wired into hillside properties. That means the person who shows up needs to understand both the steel and the electronics. Our crew does. Homeowners in the hills above Mulholland Drive and along Dilling Street call us because we don’t flinch at a cantilever gate that has drifted out of alignment after a season of clay soil expansion. And the flat-lot neighborhoods south of Ventura Boulevard, full of 1940s and 50s ranches with original wrought-iron swing gates, call us because we repair the hinge post instead of selling them a new gate they don’t need.
Every job comes with the 90-Day Done Right Promise. If it’s not done right, one call brings Hal back. No runaround, no fine print. His name is on the shop and on every invoice. The address is published. The license number is published. You can look any of it up. That’s the kind of accountability a national outfit can’t offer, because there’s no person attached to their phone number.
We also answer the phone live at 3 p.m. on a Sunday and at 3 a.m. on a Tuesday. In Studio City, where a gate that won’t close is a real security issue for people who travel often or keep expensive equipment at home, that matters.
Gate Repair Services We Offer in Studio City
Gate Repair
A sagging gate, a bent hinge, a wheel that’s chewed through its track, a post that’s leaning after the winter rains. We repair all of it, usually in your driveway. On-site welding means the gate stays put while we work, and we fix the root cause, not the symptom.
Learn more about our Gate Repair in Studio City.
Gate Installation
Whether you’re replacing a rusted iron gate or putting in a new automatic system for a hillside driveway, we measure, order, and install properly. The price is quoted and agreed before any work starts, and we don’t change it at the door.
Learn more about our Gate Installation in Studio City.
Gate Motor & Opener
Studio City has a lot of higher-end automatic operators on sloped driveways where the motor works harder than it would on flat ground. We service and replace LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers.
Learn more about our Gate Motor & Opener in Studio City.
Gate Access Control
Calls boxes, keypads, intercoms, phone line integrations, camera systems. If your gate is tied into a Doorbird or similar intercom and the buzzer isn’t opening the gate, we trace the problem from the keypad to the control board. This is where a lot of flat-lot technicians lose the thread.
Gate Parts & Welding
Hinges, brackets, track wheels, pickets, post caps. If the part exists, we can get it. If it’s welded, we can weld it. We carry and source parts for all nine major brands we service, and we do the fabrication work on site.
Neighborhoods We Serve in Studio City
We repair gates all over Studio City, from the canyon runs up to Mulholland to the grid streets off Moorpark. Here are a few of the neighborhoods we work in regularly:
- Fryman Canyon and hillside drives off Laurel Canyon
- The flats around Ventura Boulevard between Whitsett and Coldwater
- Silver Triangle and the ranch homes off Moorpark Park
- Dilling Street and the canyons toward Fryman Road
- Colfax Meadows and the streets north of Ventura
For most repairs inside Studio City, we get someone to your gate the same day you call.
Why Studio City’s Climate & Housing Affect Gate Repair
Studio City sits in the San Fernando Valley microclimate, which means summer temperatures regularly push past 100°F. Steel gate frames warp. Rubber seals dry out and crack. Operator circuit boards cook in direct sun when they’re housed in a metal box, and we replace more control boards here than in cooler parts of the city. Then the fall brings Santa Ana winds, and the eucalyptus bark and dry brush along the hillsides blow straight into sliding gate tracks. October and November are busy months for “gate won’t close” calls because debris blocks the safety sensor beam and the opener refuses to move.
There’s also the hillside factor. Properties above Mulholland Drive sit on clay-heavy soil that swells in winter and contracts in summer. Gate posts heave and rotate with the ground. A cantilever sliding gate that was perfectly aligned in June can bind in February. The same cycle repeats year after year at the same addresses, because the soil never stops moving. Flat-lot technicians who don’t see this cycle often misdiagnose the opener as the problem, when the real issue is the post footing. We know the difference, because we’ve seen it on Studio City hillsides for a long time.
Pricing for Gate Repair in Studio City
Here’s what gate repair in Studio City typically costs, based on the work we actually do here:
- Service call and diagnosis: $35-$50, applied to the repair
- Hinge replacement and gate re-alignment: $150-$350
- Operator control board replacement: $250-$650 depending on brand
- Track repair or replacement for sliding gates: $200-$600
- Cantilever gate re-alignment on hillside property: $300-$700
- Access control or intercom integration repair: $150-$500
Every price is quoted and agreed before we touch the gate. We offer $40 off any repair over $200, no trip charge inside Los Angeles County, and a permanent 10% discount for seniors and veterans. If you already have a written estimate from another company, bring it to us and we’ll give you a free second opinion.
Service Area - Cities Near Studio City
Our crews serve Studio City locally, and we also cover neighboring communities in the San Fernando Valley. If you’re nearby, take a look at our pages for Gate Repair in North Hollywood, Gate Repair in Van Nuys, Gate Repair in West Hollywood, and Gate Repair in Sherman Oaks.
Serving Studio City, CA - Our Local Coverage Area
We’re based in the Studio City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Studio City
Most repairs in Studio City run between $150 and $700 depending on the failure. Hinge work and re-alignment sit at the lower end, while cantilever gate work on hillside properties and control board replacements sit at the higher end. Your final price is quoted and agreed before any work starts. Call (951) 749-5734 for a free estimate.
For most gate repairs in Studio City, yes. We can often get someone to your gate the same day you call, and a live person answers the phone 24 hours a day. If it’s not an emergency call, timing depends on the repair, but most jobs are done within a day or two. Call (951) 749-5734 and we’ll tell you exactly when someone can be there.
A repair starts with a diagnosis, which means figuring out why the gate is failing, not just replacing parts. Then the actual fix, which may mean welding, re-alignment, new hinges, track work, or a control board. We do the work in your driveway when it’s possible, and every job carries the 90-Day Done Right Promise. If something isn’t right, we come back.
Yes. Automatic gates in Studio City, especially the camera-integrated systems on hillside properties, require the safety edges and sensors to be properly wired and adjusted. We handle power runs, loop detectors, intercom integration, and the safety perimeter. These aren’t afterthoughts; they’re part of the gate, and we don’t leave them half-done.
We’re licensed, insured, and bonded, and our license number and shop address are published for anyone to check. Hal Gatewood has owned and operated this company since 2001, and his name is on every invoice. You can drive to the shop and look him in the eye. That’s the whole point.
Call for a Free Estimate in Studio City
If your gate is sagging, stuck, beeping, or won’t close, call (951) 749-5734. A live person will answer, day or night, and we’ll get someone out to look at it. The estimate is free, there’s no pressure, and the price you’re quoted is the price you pay. If you’re not sure what’s wrong, describe the problem on the phone and we’ll tell you what to check first.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Studio City and the surrounding San Fernando Valley communities since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Studio City Customers Say
"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim