Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Tarzana
Gate parts and welding in Tarzana usually comes down to one question: can the hinge post be saved, or does it need to be re-set? On Tarzana’s hillside estates south of Ventura Blvd, a sagging gate is rarely just a bent hinge. The concrete driveway slopes, the post shifts over years of heat and soil movement, and the gate drifts out of square. We fix that at the footing, not just the panel. Hal Gatewood has been doing this since 2001, and the crew that shows up at your Tarzana driveway will weld on site, explain what failed, and leave you with a written 90-Day Done Right Promise. Call (951) 749-5734 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Tarzana’s Preferred Gate Parts & Welding Company
Tarzana is a specific kind of place to work. The flat streets near Ventura Blvd are full of 1950s and 60s ranch homes where driveway gates were added later as security upgrades, often with post footings that were never meant to carry an automatic operator. Then you drive ten minutes south and you’re on Vanalden or Reseda Blvd climbing into hillside estates where a 16-foot wrought-iron gate has been swinging on a sloped concrete pad for twenty years. Both jobs need different skills. We bring both.
We are locally owned and owner-operated. Hal’s name is on the shop and on every invoice. The published address and license number are real, and you can look them up. Tarzana homeowners tell us they’ve been burned by companies that quoted one price on the phone and billed another at the door. Our price is quoted and agreed before any work starts. Period.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround. Our Gate Parts & Welding team answers calls with a live person 24/7, not a voicemail or a dispatch queue in another state. When you call about a gate that won’t close on Oxnard Street or a ranch gate off Wells Drive, you get someone who knows the difference between those two jobs.
Our Gate Parts & Welding Services in Tarzana
Hinge Replacement
On Tarzana hillside properties, a hinge rarely fails on its own. The post shifts, the gate leans, and the hinge takes the weight at an angle it was never built for. We replace the hinge, but we check the post first. If the footing has moved, we re-set it and weld a reinforcement plate to the lower hinge so the fix holds. We fix the panel without the post and you’ll fix it twice.
Post Replacement
Sloped concrete driveways are the main culprit in Tarzana post failures. A steel post embedded in concrete that slopes toward the street collects stress from the gate’s full weight every time it opens. Over years of 105°F summers and Santa Ana wind events, hairline cracks become real movement. We core-drill the old footing, set the new post in fresh concrete, and get the gate square again. This is where most of our Tarzana gate parts and welding calls actually start, not at the panel.
Rail Repair
Wrought-iron and aluminum gates on exposed hillside driveways catch wind hard during Santa Ana season. The rails flex, the welds at the rail-to-stile joints crack, and the gate starts rattling before it visibly sags. We weld the cracks on site, add reinforcement where the design allows it, and repaint the repair so it disappears into the original finish. No hauling the gate to a shop.
Custom Welding
Tarzana still has properties with horse-keeping facilities, a legacy of the area’s ranching past. That means one property can have an ornamental automatic front gate and a functional pipe-steel ranch gate at the rear paddock entrance. Two completely different welding jobs on the same call. We do both. For custom work, we measure, quote a written price, and build or repair on site. Hal has been welding since 2001 and he gets annoyed when he sees sloppy work somebody left behind. He won’t leave sloppy work behind himself.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tarzana
We’re certified to service nine major gate brands, and for Tarzana customers the ones we see most often are Linear, Viking, Ghost Controls, and DoorKing. We stock common replacement parts locally so most hinge, roller, latch, and operator repairs don’t wait on a shipment. If your Tarzana gate runs on one of these and the operator is straining against a drifted post, the fix is the footing, not a new board. Show me the gate closing on its own and I’ll show you where it’s failing.
Common Gate Parts & Welding Problems We See in Tarzana Homes
- Hinge-post drift on sloped driveways. The concrete slopes, the gate’s full weight leans into the post, and the footing shifts a fraction of an inch per year. The latch stops catching, the gate sags on the strike side, and panel-only repairs keep failing because the post is the problem.
- Solar opener batteries cooking in summer heat. Tarzana sits deep in the San Fernando Valley heat pocket, regularly hitting 105°F to 112°F. Battery backups on solar-charged systems degrade fast in that heat, and a gate that went dead during a heat wave is a real problem when you need horse trailer access to a rear paddock.
- Santa Ana wind damage to aluminum gates. Wind gusts funnel through the canyons and hit exposed hillside driveways hard. Lightweight aluminum frames flex, welds crack at the rail-to-stile joints, and the gate starts wobbling long before it fails. We reinforce and re-weld before a gust finishes the job.
- Retrofitted gates on 1960s ranch homes. Flatland Tarzana homes near Ventura Blvd often had automatic gates added years after the house was built, and the post footings weren’t poured for the load. The operator works harder than it should, the hinges wear unevenly, and the fix is a re-set post plus a properly hung gate, not a new operator.
Pricing for Gate Parts & Welding in Tarzana, CA
Here are the ranges we quote most often in Tarzana. A standard residential hinge replacement runs $185 to $340 depending on gate weight and whether the post needs reinforcement. Post replacement, including core-drilling the old footing and setting the new post, typically runs $450 to $850 on a flat driveway and $600 to $1,100 on a sloped hillside pad where the work takes longer. Rail repair and re-welding cracks usually comes in between $150 and $400 per rail. Custom pipe-steel ranch gate welding runs $80 to $120 per hour plus materials, and most ranch gate repairs land between $300 and $700 total. Every quote is written and agreed before we start. No trip charge inside the county. $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (951) 749-5734 for an exact number. Estimates are free.
We Also Serve Cities Near Tarzana
Our Gate Parts & Welding in Tarzana team covers the full Tarzana area, and we regularly work in Encino, Reseda, Sherman Oaks, and Northridge. If you’re just over the line in any of those neighborhoods, same crew, same pricing, same 90-Day Done Right Promise. Call and ask for Hal. He’ll tell you straight what the gate needs.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Tarzana
Because the panel is rarely the problem. On sloped concrete driveways south of Ventura Blvd, the hinge post footing shifts over years of heat, soil movement, and the gate’s full weight leaning downhill. The post goes out of square, the gate sags on the latch side, and welding the panel alone is a temporary fix. The real repair is re-setting the post and welding a reinforcement plate to the hinge. We pulled into a hillside property off Vanalden Avenue where a 16-foot wrought-iron swing gate had sagged two inches on the latch side. The post was the culprit. We core-drilled and re-set it, welded the reinforcement plate, and retuned the LiftMaster operator so the gate closed square again. That’s the fix that lasts. Call (951) 749-5734 and we’ll diagnose yours the same way, free estimate included.
Yes. Tarzana’s hillside parcels still have horse-keeping facilities, a legacy of the area’s ranching past, and we regularly weld pipe-steel and tubular ranch gates at rear paddock entrances. These are different from ornamental driveway gates: thicker steel, heavier hinges, and usually no automation. We bring the welder to the property and do the work on site. Expect $80 to $120 per hour plus materials, with most ranch gate repairs landing between $300 and $700. Call (951) 749-5734 for a written quote before work starts.
For a slide gate on an exposed Tarzana hillside driveway, we recommend heavy-duty steel rollers with sealed bearings, and we check the track for debris before Santa Ana season. Wind gusts funnel through the canyons and drive leaves, dirt, and small branches into slide-gate tracks. Lightweight residential rollers wear fast under that load. We quote upgraded roller assemblies around $120 to $260 installed, depending on gate weight and track condition. Call (951) 749-5734 and we’ll tell you what your track actually needs.
Yes, and there’s a reason. Tarzana sits deep in the San Fernando Valley heat pocket, regularly hitting 105°F to 112°F. Solar-charged backup batteries degrade fast in that kind of heat, especially on exposed hillside driveways with direct afternoon sun. The fix is usually a higher-capacity battery and sometimes added shade for the battery box, not a whole new opener. We service Linear, Viking, Ghost Controls, and DoorKing solar systems in Tarzana regularly. Call (951) 749-5734 for a battery check before the next heat wave kills the gate on the day you need it.
Yes, and that’s usually the smarter call. Flatland Tarzana homes near Ventura Blvd often had automatic gates added years after the house was built, with post footings that weren’t poured for the load. The gate itself is usually fine. The post has shifted, the hinges are worn unevenly, and the operator is straining. We re-set the post, replace the hinges, and retune the operator. A full replacement is rarely necessary. That repair-first approach is what we do. Call (951) 749-5734 for a free estimate and a straight answer on what your gate actually needs.
If your Tarzana gate is sagging, stuck, or the operator is straining, call (951) 749-5734. We’ll answer live, quote upfront, and stand behind the work with the 90-Day Done Right Promise. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tarzana since 2001.