Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterPedestrian Gate Repair and Installation in Van Nuys, CA
Pedestrian gate repair in Van Nuys typically ranges from $150 to $450 depending on whether the issue is a misaligned hinge, a failed latch, or a broken gate closer, and we can usually provide a firm quote over the phone or during a quick site visit. If you are dealing with a gate that drags on the concrete, won’t latch securely, or just feels heavy and dangerous to operate, we can help. At Gatewood Fence & Gate, we have been handling gate service since 2001, and we believe in fixing what you have rather than trying to sell you a brand-new system you don’t need. When you call (951) 749-5734, you get a live person, not a call center, and you get a real assessment from someone who knows the local area and the specific challenges of our Southern California climate. If you are looking for a full Gate Installation in Van Nuys, we handle that too, but we start by looking at your current setup to see if a repair is the smarter, more affordable path.
When You Need Pedestrian Gate Service
We see a lot of the same issues across Van Nuys neighborhoods, from the older homes near the park to the newer developments on the outskirts. A pedestrian gate isn’t just a piece of metal or wood; it is your first line of security and the first thing guests touch when they arrive. When it fails, it becomes a daily frustration.
* The gate drags on the driveway: This is almost always a hinge issue. In Van Nuys, the ground shifts with our seasonal temperature swings, and if your post wasn’t set deep enough in the concrete, the hinge will sag. We don’t just lift the gate; we reset the hinge or reinforce the post so it stays level.
* The latch won’t catch: If you have to lift the gate to get it to click shut, your latch is fighting the alignment. We see this often with older Linear or Viking hardware that has simply settled out of square over the years.
* The gate closer is slamming or leaking: A hydraulic gate closer should be smooth and quiet. If it’s slamming shut or leaking oil, it’s a safety hazard. We service and replace closers for most major brands, including DoorKing and Ghost Controls.
* Rust and structural weakness: We see a lot of iron gates suffering from the salt air and humidity. If the bottom rail is rusting through, we can cut out the bad section and weld in fresh steel on-site. We don’t need to haul your gate away to the shop for a simple fix.
* Access control failure: If your electric strike or keypad has stopped responding, it might be a simple wiring issue or a power supply failure. We troubleshoot the electrical side of your gate system to get you back in without replacing the whole unit.
Our Pedestrian Gate Process
We don’t believe in surprises. When you call us, you are talking to someone who understands the mechanical side of gates, not a dispatcher reading from a script. Here is how we handle your pedestrian gate needs.
1. Initial Assessment: You call (951) 749-5734, and we talk through the symptoms. Often, I can tell you exactly what is wrong just by hearing how the gate sounds or seeing a picture.
2. On-Site Evaluation: If it’s a physical repair, I come to your property. We don’t charge a trip fee inside the county. We look at the hinges, the latch, the post, and the ground clearance.
3. The Fix: We bring the tools to you. If it requires welding, we do it right in your driveway. My truck is a mobile shop. We fix the panel without the post, and we make sure the gate is balanced so the hinges aren’t taking all the stress.
4. Verification: We test the gate under load. A gate that swings perfectly when empty might drag when it’s closed, so we verify the latch alignment and the closer speed while you are there to see it.
5. The 90-Day Promise: Every repair is backed by our 90-Day Done Right Promise. If the gate acts up again within 90 days, you call me, and I come back to make it right. No runaround, no excuses.
Pedestrian Gate Pricing in Van Nuys
We keep our pricing straightforward because that is the only way to do business in a town like Van Nuys. We don’t have hidden fees, and we don’t inflate costs to cover “marketing budgets.” We offer a permanent 10% discount for seniors and veterans, and we take $40 off any repair over $200.
| Service Type | Estimated Range | What’s Included |
| :— | :— | :— |
| Hinge Adjustment & Alignment | $150 - $250 | Resetting hinges, shimming, and post reinforcement. |
| Latch & Strike Repair | $120 - $220 | Replacing broken latches, adjusting strike plates for smooth closure. |
| On-Site Welding Repair | $200 - $450 | Cutting out rusted sections, welding new steel, grinding, and prep. |
| Gate Closer Replacement | $250 - $500 | Removing old unit, installing hydraulic closer, speed calibration. |
| Electric Strike/Lock Repair | $180 - $350 | Wiring diagnostics, solenoid replacement, or power supply check. |
If you have a written estimate from another company, show it to us. We offer a free second opinion on any written estimate. If we can do the job for less-or if we can fix it when they told you it needed to be replaced-we will tell you. Call us at (951) 749-5734 for an exact quote.
FAQs - Pedestrian Gate
Can you repair my gate today?
We prioritize safety and security, so if your gate is stuck open or won’t lock, we do our best to get to you as quickly as possible. Call (951) 749-5734 to check our current schedule; because we are locally owned and owner-operated, we don’t have to wait for corporate approval to fit you into the day.
Is it cheaper to repair or replace my pedestrian gate?
In most cases, it is significantly cheaper to repair a gate, especially if the frame is still sound. We specialize in repair-first solutions, like on-site welding for rusted rails or hinge reinforcement, which can save you thousands compared to a full home gate installation. If the gate is beyond saving, we will be honest with you about it, but we usually find a way to make it work.
What brands of gate hardware do you service?
We are certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whether it is an old mechanical latch or a modern electronic access system, we have the parts and the experience to handle it.
Do you charge for estimates?
We do not charge for estimates, and there is no trip charge inside the county. We believe that if you are taking the time to call us, we should take the time to look at your gate and give you an honest answer, free of charge.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Van Nuys.