Electric Gate Repair in Van Nuys, CA

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Electric Gate Repair in Van Nuys, CA

Electric gate repair in Van Nuys typically ranges from $180 to $450, depending on whether the issue stems from a faulty circuit board, a misaligned gate, or a failing motor. At Gatewood Fence & Gate, our Gate Repair services specialize in diagnosing these issues on-site to get your gate moving again without unnecessary part replacement. If you are stuck behind a gate that won’t open, call us at (951) 749-5734 for a prompt assessment of your system.

I have been fixing gates since 2001, and I have learned that most electric gate problems are not the result of a “bad motor” that needs to be thrown away. Often, it is a matter of a sensor being blocked by local dust, a limit switch that has vibrated loose, or a chain that needs tensioning. My philosophy is simple: I fix what is broken. I do not look for ways to sell you a new system when a repair will keep your current one running for years to come. When you call us, you are not getting a call center or a dispatch team. You are calling a local shop that has been serving Gate Repair in Van Nuys for over two decades. Whether you have a sliding gate or a swing gate, my name is on the invoice, and I stand behind every job with our 90-Day Done Right Promise.

When You Need Electric Gate Repair

You know your gate better than anyone. If it starts acting differently, it is usually telling you something is wearing out. Waiting too long to address these signs often leads to more expensive damage to the motor or the gate frame. Here is what to watch for in your Van Nuys driveway:

• The Gate Stops Mid-Cycle: If your gate moves a few feet and stops, it is often a sign that the safety photo-eyes are misaligned or the motor is hitting a resistance point. In our local climate, heat expansion can sometimes cause metal to swell, making the gate harder to move.
• Grinding or Squealing Noises: A gate should move quietly. If you hear grinding, it usually points to a lack of lubrication on the chain or worn-out rollers. Ignoring these sounds can eventually strip the gears inside your motor, which is a much costlier repair.
• The Remote or Keypad Stops Responding: Before assuming the motor is dead, we check the control board and the power supply. A simple power surge or a loose wire connection is a common culprit in this area.
• The Gate Stays Stuck Open: This is more than just an inconvenience. It is a security risk. If your gate will not close, check for obstructions in the track, but avoid forcing the gate by hand, as this can damage the internal gearbox.
• Erratic Behavior: If your gate opens or closes on its own, you likely have a faulty limit switch or a short in the wiring. This requires a professional to trace the signal and restore the logic board settings.

If you see any of these issues, call (951) 749-5734. I will be happy to talk you through what you are seeing. Sometimes, it is something you can check yourself, like clearing debris from a sensor, but if it requires tools and electrical work, I will be the one showing up to handle it.

Our Electric Gate Repair Process

I do not believe in guessing or swapping parts just to see if it works. My approach is methodical. I treat every gate as if it were on my own property. Here is how we handle a service call:

1. The Initial Assessment: I arrive on-site and listen to how the gate behaves. I check the gate’s movement manually to see if the issue is mechanical, like a bent hinge or a sagging frame, before I even touch the electrical components.
2. Electrical Troubleshooting: If the mechanical side is fine, I check the voltage coming into the control board. I test the major brands, including Linear, Viking, and DoorKing, to ensure the board is receiving the correct signals.
3. Component Testing: I test the safety loops, the photo-eyes, and the gate limits. Many times, a repair is as simple as recalibrating the motor’s sensitivity settings or cleaning the contacts on the board.
4. On-Site Repair: Because I carry a well-stocked truck, I can often perform the repair immediately. Whether it is welding a hinge back into place or replacing a capacitor, I do it right there in your driveway.
5. Safety Verification: Before I leave, I cycle the gate multiple times to ensure it stops exactly where it should. I verify that the safety sensors function correctly so you can have peace of mind when the gate closes.

Safety Warning: Electric gates are heavy, and the motors operate with enough force to cause serious injury. The internal electrical components carry high voltage that can be dangerous if mishandled. If your gate is malfunctioning, please do not attempt to bypass safety loops or open the motor housing yourself. Keep children and pets away from the gate until a trained professional has secured the area.

Electric Gate Repair Pricing in Van Nuys

I believe in upfront pricing. You will never be surprised by a bill when I am finished. We do not have a trip charge inside the county, and we offer a permanent 10% discount for seniors and veterans. If you have an existing written estimate from another company, I am happy to provide a free second opinion. We also offer $40 off any repair over $200.

Call (951) 749-5734 for an exact quote. I can usually give you a very good idea of what to expect over the phone before I ever step foot on your property.

FAQs - Electric Gate Repair

How much does it cost to fix an electric gate in Van Nuys?

Most repairs in the Van Nuys area fall between $180 and $450, depending on the complexity of the issue-see How Much Does Gate Repair Cost? (2026 Price Guide) - Van Nuys, CA for more details. Simple adjustments or sensor cleanings are on the lower end, while motor gear replacements or circuit board repairs sit on the higher end. Call (951) 749-5734 for an accurate estimate.

Can you fix my gate if it is a brand you don’t install?

Yes, I am certified to service nine major brands, including Ghost Controls, Linear, and Viking, among others. Even if your gate is an older model, I have the experience to source the right parts or find a compatible solution so you do not have to replace the entire system.

Is it cheaper to repair or replace my gate motor?

In almost every case, it is cheaper to repair, and that is exactly what I specialize in. Many companies will tell you to replace the motor because it is easier for them, but a repair is often the better choice for your wallet. I will always give you an honest recommendation on whether a part has reached the end of its life or if it just needs a little care.

Can you come out today to look at my gate?

I prioritize urgent calls because a broken gate is a security risk. If you are stuck or your gate is wide open, call (951) 749-5734 as soon as possible. I answer the phone 24 hours a day, 7 days a week, and I will do my best to get to you as quickly as I can.

When you need a repair that lasts, you need someone who knows the equipment and the local neighborhood. I have been doing this for over 29 years, and I take pride in the fact that I fix things the first time. The name is on the shop, and the shop is down the road. If you have a problem with your electric gate, call (951) 749-5734 today for a free estimate and honest, straightforward service.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Van Nuys.