Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Van Nuys: What to Know First
Ghost Controls gate repair in Van Nuys is work we do regularly, and most jobs are finished same-day once we’re on site. A typical Ghost Controls opener repair runs between $185 and $420 depending on whether it’s a control board, a limit switch, or an arm assembly that’s failed. We’re an independent Ghost Controls service provider, not a factory rep, and we quote the price before any work starts so you know exactly what you’re paying. If your gate is stuck open, stuck closed, or making a grinding sound it didn’t make last week, call (951) 749-5734 and a live person answers.
This page is for Van Nuys homeowners and property managers who own a Ghost Controls opener and need it fixed right the first time.
Key Takeaways
- Most Ghost Controls repairs in Van Nuys are done same-day once we’re on site.
- Typical repair cost: $185 to $420, quoted and agreed before work begins.
- We’re an independent Ghost Controls service provider, not a factory-authorized dealer.
- Every job carries our 90-Day Done Right Promise in writing.
- On-site welding means the gate stays in your driveway. We don’t haul it off.
How Ghost Controls Products Fail - and How We Fix Them
- AXV Series arm assembly seizing: The AXV and AXV-II swing arm models are common across Van Nuys driveways, and we see the internal gear train bind up when the grease breaks down or the limit switch contacts corrode. The symptom is a gate that starts moving, then stops mid-travel with the opener clicking. We pull the arm, clean and regrease the gear train, and replace the limit switch assembly if the contacts are pitted. You don’t need a whole new opener for a $60 part and an hour of bench work.
- TSS1 remote signal dropout: Ghost Controls remotes lose range over time, but when a TSS1 or TSS1XP stops working from the street yet works from up close, the problem is usually the antenna wire, not the remote. In Van Nuys heat, the antenna wire insulation gets brittle and cracks. We replace the wire and re-tune the receiver, and the range comes right back. Ghost’s own manual doesn’t tell you this, but any tech who’s fixed more than a dozen of these knows it.
- Control board failures after Van Nuys power flickers: Ghost Controls boards are more sensitive to voltage spikes than most brands. When LADWP cuts power and brings it back quickly, we see the AXDP main board fail before the transformer does. The gate won’t respond at all, and the LED just flickers. We test the board, confirm the transformer is still good, and replace only the failed component. No reason to replace both.
- Battery backup drains in the first year: Ghost Controls GBC series battery backups tend to swallow batteries in hot garages. By 12 months, the battery won’t hold a charge even though the indicator says it will. In Van Nuys, where garages hit 110°F in August, we recommend checking the battery terminals for corrosion at the same time we’re in there, because a corroded terminal is usually the real culprit, not the battery itself.
- Gate hinge and post wear that no opener will fix: Here’s the one that gets missed by every operator-only repair company. A Ghost Controls opener is only as good as the gate it’s pushing. When a swing gate starts dragging or binding, the problem is in the hinge post or the weld at the bottom rail. We check the gate itself first, then the opener. Fix the panel without the post and you’ll fix it twice. That’s where our on-site welding comes in.
Our Ghost Controls Gate Repair Process
- 1
You call, we answer. A live person picks up at (951) 749-5734, day or night. We ask what the gate is doing, what model you have, and when you need it fixed.
- 2
We show up and diagnose. We test the opener, the gate itself, and the power source. We look for the root cause, not just the symptom.
- 3
We quote before we touch anything. You get a fixed price, written down, before any work starts. No surprises at the end.
- 4
We make the repair. Whether it’s a new control board, a rebuilt arm, or welding a sagging hinge post, the work happens in your driveway. The gate doesn’t leave.
- 5
We test the full cycle. The gate opens, closes, stops, and reverses the way it should. We check the force settings and the auto-close timing.
- 6
We hand you the invoice with the 90-Day Done Right Promise on it. If anything isn’t right, one call brings us back.
What Ghost Controls Gate Repair Costs in Van Nuys
Here are honest numbers from jobs we’ve done in Van Nuys, Sherman Oaks, and North Hollywood:
| Repair | Typical Cost Range |
|---|---|
| Limit switch or travel module replacement | $185 to $260 |
| Arm assembly rebuild (AXV/AXV-II) | $240 to $320 |
| Control board replacement (AXDP or similar) | $260 to $420 |
| Remote reprogramming or receiver repair | $90 to $150 |
| Gate hinge or post repair, including on-site welding | $220 to $480 |
| Full opener replacement (parts and labor) | $520 to $850 |
What moves the price is whether the part is still made, whether the gate itself needs work, and how long it’s been left running while wounded. A gate that’s been forced open manually for weeks usually costs more to fix than one that stopped yesterday. Estimates are free. No trip charge inside the county. And remember the standing offers: $40 off any repair over $200, and a free second opinion on any written estimate from another company.
Why Van Nuys Homeowners Call Gatewood Fence & Gate for Ghost Controls Work
We’ve been at this since 2001, and the name on the shop is Hal Gatewood. That’s not a marketing line, it’s how we’ve run the business for over 29 years. When you call, Hal or one of his crew answers. When we quote a price, it’s the price you pay. And when we finish a Ghost Controls job, the 90-Day Done Right Promise is printed right there on the invoice. Not “up to” 90 days. Not “in most cases.” Ninety days. One call, we’re back.
Van Nuys folks know we don’t just do Ghost Controls. We service LiftMaster, Mighty Mule, and DoorKing too, so if you’ve got two gates with two different brands, you still make one call. We’re background-checked, uniformed, and certified on nine major gate brands. The person who shows up is the person who’s accountable.
Just give me a call - that’s still my number on the truck.
FAQs
No, we’re not an authorized Ghost Controls dealer or factory representative. We’re an independent Ghost Controls service provider, which means we’re not bound by factory pricing, we can use either OEM or quality aftermarket parts depending on what’s best for your budget, and we’re not going to sell you a full system replacement when a $60 part fixes the problem.
Yes. Most common Ghost Controls parts, like control boards, arm assemblies, limit switches, and remote transmitters, are available from local suppliers or shipped within one to two business days. For older models where the part is discontinued, we either rebuild the existing component or source a compatible replacement. Call (951) 749-5734 and we’ll tell you the same day whether we can get the part and what it’ll cost.
If the opener is under five years old and the arm or board is the problem, repair is almost always the better call. If the opener is over ten years old, has multiple components failing, or the motor windings are shot, we’ll tell you that too and give you an honest comparison. We’d rather fix a $240 part than sell you a $700 opener you don’t need. That’s how we’ve run the business for 29 years.
Most Van Nuys repair jobs are scheduled within 24 to 48 hours, and we carry common Ghost Controls parts on the truck. If the gate is stuck open and your security depends on it closing, let us know and we’ll prioritize it. We answer the phone live, 24/7, so there’s no voicemail that doesn’t get returned until Monday.
If your opener is under the Ghost Controls manufacturer warranty, we can help you determine what’s covered and then perform the labor portion of the repair. The warranty covers parts, not the labor to install them. We’ll give you a straight answer on what the out-of-pocket cost will be before any work begins. Call us at (951) 749-5734 and we’ll walk you through it.
Ready to Get Your Ghost Controls Gate Working Again?
Call (951) 749-5734 for a free estimate. Hal or one of his crew will answer live, any hour, any day. We’ll give you a fixed price before any work starts, and every job ends with the 90-Day Done Right Promise in writing. Whether it’s a dead board in a Ghost Controls AXV, a sagging hinge post, or a gate that won’t stop mid-cycle, we’ll fix it right the first time and stand behind the work. That’s how we’ve earned our name in Van Nuys since 2001.
Written by Hal Gatewood, Owner, Gatewood Fence & Gate - Van Nuys, CA at Gatewood Fence & Gate, serving Van Nuys and nearby areas.