Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Van Nuys?
Most Gate Repair in Van Nuys typically costs between $180 and $450, depending on whether the issue is a simple sensor misalignment or a more complex motor failure. For standard welding repairs, homeowners usually pay around $250, while full gate operator replacements can range from $900 to $2,200 depending on the brand and complexity of the install.
When you call Gatewood Fence & Gate at (951) 749-5734, you get a straight answer, not a sales pitch. We have been owner-operated since 2001, and I have seen enough gates in this valley to know that a saggy hinge or a noisy chain doesn’t always mean you need a new system. Often, it just means you need someone who knows how to weld it right the first time.
Gate Repair Cost Breakdown (2026)
Van Nuys weather, specifically the dry heat and the occasional heavy rain, takes a toll on gate hardware. When I look at a gate, I am looking at the structural integrity first, then the electrical components. Below is a breakdown of what you can expect to pay for common repairs in our local market. Please keep in mind that these are estimates based on standard residential gate systems.
- Gate Hinge Welding & Adjustment: $180 - $350. This covers re-welding broken hinges or reinforcing the post connection.
- Gate Opener Sensor Alignment: $150 - $220. Often, debris or shifting ground causes sensors to lose sight of each other.
- Chain or Belt Drive Replacement: $250 - $450. Includes parts and labor for standard chain-drive systems.
- Gate Controller/Board Repair: $300 - $600. Sometimes the board just needs a reset or a minor component swap rather than a full unit replacement.
- Complete Gate Operator/Motor Replacement: $900 - $2,200. This depends on whether we are installing a high-end LiftMaster or a more standard unit like a Mighty Mule or Ghost Controls system.
If you have a written estimate from another company, I am happy to take a look at it for free. I often find that other companies quote for a full replacement when a simple repair would have done the job. We specialize in on-site welding, which means I can usually fix your gate right there in your driveway without hauling it away.
What Affects Gate Repair Pricing in Van Nuys?
Pricing isn’t just about the part that broke; it is about the labor and the specific conditions of your installation. In Van Nuys, I see a few common factors that change the bottom line for my neighbors.
- The Gate Material: Wrought iron gates are heavy. If the hinge post has shifted, we have to account for the weight of the steel when we realign it. Wood gates, conversely, often suffer from rot at the base, which changes how we approach the repair.
- Accessibility: If your gate is tucked into a tight alleyway or blocked by overgrown landscaping, it takes us longer to access the motor or the hinge points. We do not charge extra for “difficulty,” but it does take time to do the job safely.
- Brand Compatibility: We are certified to service nine major brands, including FAAC, BFT, Linear, Viking, DoorKing, and Elite. Some brands have proprietary parts that are more expensive to source than others.
- Ground Shifting: Van Nuys soil can be reactive. If your gate post has sunk or tilted, we can’t just fix the hinge. We have to address the root cause, or the gate will just sag again in six months.
- Electrical Access: Older homes often have outdated wiring running to the gate motor. If we have to bring the power supply up to modern code, that adds to the labor time.
Safety is the priority. High-tension springs and heavy gate panels are dangerous if they fall. If you notice your gate dragging on the concrete or the chain hanging loose, do not try to force it open or closed. Call us at (951) 749-5734. It is better to have a trained professional take a look than to risk a heavy gate panel falling over.
How to Save on Gate Repair
You don’t need to overpay to get your gate working again. My goal at Gatewood Fence & Gate is to fix what you have, not sell you something you don’t need. Here is how we keep costs manageable for our neighbors.
First, take advantage of our standing offers. We offer $40 off any repair over $200. If you are a senior or a veteran, you always get a 10% discount. We also do not charge a trip charge if you are inside the county. These aren’t temporary coupons; they are how we do business every day.
Second, do not wait until the gate stops working entirely. A gate that makes a grinding noise is usually a minor adjustment. A gate that has fallen off its hinges is a major repair. Calling us when you first hear the noise saves you money on emergency service calls and prevents further damage to the motor or the frame.
Finally, ask for a second opinion. If a national, faceless company gave you a quote that seems high, call me. I provide a free second opinion on any written estimate. I will be honest with you about whether you actually need a new motor or if a simple tune-up will get you another five years of life out of your current system.
How We Handle Your Gate Repair
When you call us, you aren’t getting a call center or a chatbot. You are getting a live person who can actually answer questions about gate mechanics. Since 2001, we have operated with a simple philosophy: if the gate is broken, we fix it. We don’t hide behind fine print.
Our 90-Day Done Right Promise is printed on every invoice. If I weld a hinge or replace a board and it isn’t right, you call me. I come back and make it right. No runaround, no excuses. My name is on the shop, and my reputation is built on the work I do right here in Van Nuys.
If you are looking for a home service provider that treats your property like their own, you have found the right place. We show up on time, we use quality parts, and we make sure the gate is secure before we leave. Whether you need a Gate Repair in Van Nuys or just a professional opinion on a noisy motor, I am ready to help.
FAQs - Gate Repair Cost
How much does it cost to weld a broken gate hinge?
Welding a broken gate hinge typically costs between $180 and $350, depending on the severity of the break and whether the post itself needs reinforcement. We always assess the structural integrity of the post to make sure the weld holds, because if the post is failing, the hinge will just break again. Call (951) 749-5734 for a precise quote.
Is it cheaper to repair or replace a gate motor?
In most cases, it is significantly cheaper to repair a gate motor, often costing between $250 and $600, whereas a full replacement ranges from $900 to $2,200. Unless the motor is obsolete or the circuit board is completely fried, we can usually get it running again. We give you an honest recommendation on whether a repair is worth the investment.
Do you charge for estimates?
No, we do not charge for estimates, and we provide a free second opinion on any written estimate you have already received from another company. We believe in transparency, so we offer upfront pricing with no hidden fees or surprise trip charges for local service. Give us a call at (951) 749-5734 to schedule your assessment.
Can you fix my gate today?
We do our best to accommodate urgent requests, as we know an open gate is a security risk for your home. Since we are locally owned and owner-operated, we don’t have to wait for dispatch approval from a corporate office. Call us at (951) 749-5734 to see if we can get a technician out to your property today.
Do you offer discounts for seniors or veterans?
Yes, we offer a permanent 10% discount for all seniors and veterans as a thank you for your service and support of our local community. This is in addition to our other standing offers, like the $40 discount on repairs over $200. Just let us know when you call, and we will make sure it is applied to your invoice.
Pricing reflects the Van Nuys market as of 2026. Gatewood Fence & Gate offers free estimates - call (951) 749-5734. Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Van Nuys since 2001.
What Our Customers Say
"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg