Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Granada Hills
Gate parts and welding in Granada Hills usually means one of three situations: a hinge post that has finally cracked loose after the 1994 Northridge quake, a slide gate that jumps its track every time the Santa Anas blow, or a panel that needs a custom weld because the original part was discontinued 15 years ago. Hal Gatewood has been fixing all three since 2001, and he does the welding in your driveway, not at a shop across town. If you need Gate Installation in Granada Hills or your existing gate is binding, sagging, or refusing to close, call (951) 749-5734 and a live person will pick up. We’ll give you a straight answer and an upfront price before anyone touches a tool.
Why Gatewood Fence & Gate Is Granada Hills’s Preferred Gate Parts & Welding Company
We’ve worked on gates in every corner of Granada Hills, from the ranch homes west of Balboa Boulevard to the hillside lots above Rinaldi Street and the neighborhoods around O’Melveny Park. The work here is different from Northridge or Panorama City because so much of the hardware is post-1994 earthquake-rebuild stock that is now reaching 27 to 30 years old, all failing on roughly the same timeline. Hal has seen the same pillars lean, the same FAAC and DoorKing operators cook their capacitors in July, and the same rack teeth wear out on slide gates along tight shared driveways. When you need a Granada Hills Gate Motor & Opener repair or replacement, that local knowledge matters. That’s local knowledge you can’t get from a parts catalog. Every job carries our 90-Day Done Right Promise in writing. One call brings Hal back, no runaround. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Our Gate Parts & Welding Services in Granada Hills
We treat Gate Parts & Welding as repair work first. If a post can be re-footed and re-welded, that’s what we do. If a hinge can be rebuilt, we don’t sell you a new gate. Here’s what that looks like in Granada Hills.
Hinge Replacement
Most swing gates in Granada Hills hang on barrel hinges or heavy weld-on hinges that were sized for a lighter gate than the one currently installed. Decades of wind load from Santa Ana events, plus the slow movement of expansive clay under the posts, work the hinge welds until they crack. We replace hinges with heavier-gauge stock, weld them in place, and check the post before we hang the gate again. Fix the panel without the post and you’ll fix it twice.
Post Replacement
This is the most Granada Hills-specific problem we see. Gate posts and masonry pillars here were shaken in 1994, re-poured or re-welded in the years after, and are now sitting in soil that swells and shrinks with every wet winter and bone-dry summer. A post that looks fine at the top can have a footing that has lifted a full inch. We cut out the old post, drill and set a new one deeper into the footing, and weld the gate back to a post that actually stays put. On shared driveways off Balboa and Louise Avenue, we coordinate the work so the gate is back on its hinges by evening.
Rail Repair
Slide gates on tighter Granada Hills lots run on a bottom rail that sees every vehicle, every day, in the same groove. The rack teeth wear unevenly, the gate starts to jump, and the rail itself can crack at the weld points. We repair the rail in place, weld new sections where needed, and re-align the rollers so the gate tracks straight. No hauling the gate to a shop. No swapping parts that don’t need swapping.
Custom Welding
When a post-quake gate panel doesn’t match the original 1960s driveway pillars, or a wrought-iron detail snaps off, a stock part won’t fix it. We weld on-site, building up whatever broke, from gate frames and pickets to rack bars and gate stop tabs. When we welded a new rail on a 1997 FAAC slide gate off Balboa, the loop detector had to stay live for two households, so we worked in sections and kept the gate operable every evening. That’s the standard, not the exception.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Granada Hills
We stock parts and service operators from Linear, Ghost Controls, and Viking, along with soldered-in boards and transformers for older FAAC and DoorKing units that are still running decades after they were installed. If you’re in Granada Hills and your gate motor is dead, we’ll be straight with you: some of these post-quake operators just need a capacitor or a belt, not a whole new motor. Others are done. Either way, you’ll know the price before we start. Our Gate Parts & Welding in Granada Hills team carries most common brackets, hinges, rollers, and weld stock on the truck, so most jobs are one visit.
Common Gate Parts & Welding Problems We See in Granada Hills Homes
- Post-quake pillars heaving on clay. Granada Hills sits on expansive soil that moves with seasonal moisture. A hinge post that was re-poured in 1996 can start leaning again by 2018, cracking the footing weld until the swing gate drags on the driveway. We see this on nearly half the service calls we run west of Encino Avenue.
- Santa Ana racking on heavy swing gates. When the winds come through September to January, long wrought-iron gates on the larger ranch-style lots take a beating. The top rail bows, the hinge welds snap, and the latch won’t line up. A gate that sags in the hinge post is a structural problem, not a cosmetic one.
- Uneven slide-gate wear on shared driveways. On the hillside streets above Rinaldi and along the older shared-access lots, vehicles run the same groove day after day. The rollers wear flat, the rack teeth lose their edge, and the gate starts jumping off its track. Replacing rollers without aligning the rail fixes it for a month. We fix the rail and the rollers together.
- Mixed-generation hardware on the same property. Granada Hills has two distinct waves of gate construction: the original 1950s-70s ranch gates, and the dense 1994-98 earthquake rebuilds. On the same property, you’ll often find a vintage gate panel hung on a post-quake pillar, or a modern operator bolted to a 1968 gate frame. We know how to work on both generations without insisting you replace the whole assembly.
Pricing for Gate Parts & Welding in Granada Hills, CA
Here are the ranges we quote in Granada Hills, not national averages. Hinge replacement typically runs $180-$340 per pair, welded and aligned. Post replacement runs $400-$800 per post, depending on whether we’re re-footing into concrete or cutting and setting a new steel post in rocky soil. Rail repair on a slide gate runs $250-$550, including straightening the bottom rail and re-welding the rack where it has pulled away. Custom welding starts around $120 for smaller bracket and picket work and goes up from there based on actual weld time. Every quote is given and agreed before any work starts. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (951) 749-5734 for an exact quote. Estimates are free.
We Also Serve Cities Near Granada Hills
Our crews run repair jobs across the northern San Fernando Valley, including Granada Hills, San Fernando, Northridge, Sylmar, and Panorama City. If your gate is down and you’re not sure where our service line ends, call us. We’ll tell you straight.
Serving Granada Hills, CA - Our Local Coverage Area
We’re based in the Granada Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Granada Hills
The original post-quake rebuilds in Granada Hills were often set in footings too shallow for the expansive clay soil the city sits on. As the soil swells with winter rain and shrinks through the dry summer, the footing moves, the post tilts, and the gate drags. We re-set posts into deeper footings or anchor steel posts into concrete, then re-check them for years, not months. If your post is leaning again, call (951) 749-5734 and Hal will come look at the footing, not just the gate.
Yes. On shared driveways off Balboa Boulevard and other tight Granada Hills rights of way, we stage the work so the gate stays operable at night and during peak hours. For post replacement, that may mean setting the post in the morning and hanging the gate by late afternoon. We have done this on long shared access drives where two households depend on the same slide gate. Tell us the access constraints when you call and we’ll plan around them.
Most of the time it’s both. The wind flexes the gate panel just enough to twist the rail, and a worn roller then climbs the rail and jumps. In Granada Hills, where we get real Santa Ana wind on the larger lots, we check the rail for straightness, check the rack teeth for uneven wear, and check the guide rollers for flat spots. Fixing the rollers without straightening the rail gets you a few quiet weeks. Fixing both gets you years. Call us and we’ll check all three before quoting.
It depends on where the crack is and whether the post has moved. A crack through the post body can often be welded, plated, and reinforced without touching the footing. A crack at the base, or a post that has visibly lifted, usually means the footing itself is compromised. In Granada Hills, where clay heave is common on the hillside lots, we check for movement with a level before we weld anything. If it has moved, welding the crack just moves the problem up the post. We’ll show you what we found and quote the real fix.
Yes. We keep the photocells, the loop detector, and the safety edges wired and aligned while we weld, because proper Gate Access Control - Granada Hills homes depend on isn’t something we disconnect. On slide gates with a safety loop, like the FAAC systems common on Granada Hills shared driveways, we work in sections and never cut the loop wire. Safety edges get re-aligned to the new rail position before we run the gate. The gate has to close properly and stop when it should. That’s part of the job, not an add-on.
Contact Gatewood Fence & Gate for Gate Parts & Welding in Granada Hills
If you live in Granada Hills and your gate is sagging, jumping its track, or making a sound it didn’t make last month, call (951) 749-5734. Hal Gatewood has been fixing gates since 2001, welding on site, and standing behind every job with the 90-Day Done Right Promise. You’ll talk to a live person, get an upfront price, and deal with the same name every time. Free estimates, no trip charge inside the county, and no runaround. That’s the whole deal.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Granada Hills since the company’s founding in 2001.